No Pro? No Problem. Finish Your Own Needlepoint Acrylic Coaster

An acrylic needlepoint coaster with potted plant design
We're not professional needlepoint finishers and we finished this needlepoint design as an acrylic coaster in under an hour, using craft store supplies. We're so happy with the result!

Supplies:

  • Stitched 4" x 4" canvas, blocked square
  • Acrylic coaster
  • Fabric glue or a glue gun
  • Scissors
  • Heavy cardboard
  • Felt or adhesive felt to back the needlepoint*
  • Invisible thread, or a color that matches the design and the backing felt, if you are using non-adhesive felt
  • Chenille needle (sharp point) if you use non-adhesive felt
  • OPTIONAL: Narrow twisted cord to stitch on the outside

* We used non-adhesive felt as a backing and stitched it on. You can also used adhesive felt, a quicker option, but take care with cutting and measuring as you will see where the felt sides meet the stitched needlepoint and these should align as closely and neatly as possible.

Method:


  1. Cut the cardboard approximately 2mm smaller than the stitched dimensions of the canvas. You will wrap the canvas around this card so it needs to be slightly smaller.
Materials for finishing a needlepoint as a coaster
2. Trim the needlepoint canvas approximately 1/2 inch from the stitches and cut across the corners, taking care not to cut the stitches.


3. Place the cardboard over the back of the stitches and fold the canvas "flaps" onto the cardboard, securing it in place with the smallest amount of glue. Use the glue to catch the loose threads (especially at the corners) and press them down.

Finishing a needlepoint coaster

4. Cut the felt so it covers the back and lines up with the stitches.

5A. Adhere the felt to the backing OR

5B. Sew the felt using the invisible thread and a binding stitch

Binding stitch felt to needlepoint
Stitched reverse side of needlepoint coaster
Stitched front side of needlepoint coaster
If you want to, you can stitch on a twisted cord (we have not gotten around to this yet!).

6. Slide the backed needlepoint into the coaster opening and display on a coffee table, or stand it on a bookshelf as a picture.

Potted Plant needlepoint design finished and placed in an acrylic coaster
With this DIY method for finishing a needlepoint coaster, there's no waiting around and it saves you money so you can make more coasters!


Needlepoint designs in acrylic coasters



Subscribe to our newsletter

Get 10% off your first order of $40 or more, and become a Poppy Monk insider:Exclusive deals, first to see new designs, needlepoint tips & tricks. kits.